The device driver will be closed after ejecting removable media.
This is useful when exchanging cartridges formatted with different SCSI utilities.
To close the device driver after ejecting removable media, click here.
This is useful when exchanging cartridges formatted with different SCSI utilities.
Volumes will be mounted during bootup. This is useful when you have drives that take some time to spin up and the Finder doesn't see them or when you want your local drives to mount before file servers.
Click this button to disable this feature.
Volumes other than the boot volume will not be mounted until after the Finder is running.
Click this button to mount volumes during bootup.
Enter the key stroke you would like to use to mount volumes. When a volume needs to be mounted, simply enter that key stroke.
Changes take effect after clicking “OK” (if the init is loaded).
The init that allows volumes to be mounted at any time by entering a key stroke will be installed.
To not install the init, click this button.
The init that allows volumes to be mounted by entering a key stroke will not be installed.
To install the init, click this button.
The word “Macintosh” will proceed the workstation name in the product field.
Click this box to not display “Macintosh”.
The word “Macintosh” will not be displayed with the workstation name in the product field.
Click this box to display “Macintosh”.
Enter the name of this Macintosh workstation here.
Enter the name of this SCSI device. Try to keep the name less than 6 characters.
To cancel any changes you have made to the settings in this box and close this box, click this button (or press the “Escape” key or type “Command .”).
This button is not enabled because the text you have entered is either to long or there is no text.
To save the settings in this box and close the box, click this button (or press the “Return” or “Enter” key).
